DAYAGEL PRE-SPLIT is specifically designed for use in Pre-Split blasting and delivering smooth walls and a safer controlled blast.

It is most sited to hard rock operations where the smaller diameter holes are drilled.

When initiating with a detonator, ALWAYS attach the detonator directly to the external trace detonating cord on the DAYAGEL PRE-SPLIT packaged emulsion.

DAYAGEL PRE-SPLIT can be cut to fit the desired load length or spliced to increase the load length.

DAYAGEL PRE-SPLIT is not suitable for use in reactive ground.

DAYAGEL PRE-SPLIT must not be used at hole temperatures greater than 550C.